| Check The Competition | Thaler Value
Added Features | |
 |  | EPDM Base Seal; EPDM 'memory' in the seal provides constant pressure to outside of vent pipe to prevent condensation build-up. See Thaler EPDM Flashing Seals literature. |
| | | EPDM Base Seal sizes; available in any diameter from 3” (76 mm) to 10” (254 mm) vent pipe sizes. |
| | | Condensation Free; the cone-shaped hood is designed to re-direct any wintertime condensation to the exterior rather than back into the vent space. |
| | | Slotted or Perforated Collar; designed to suit specific application e.g. dryer exhaust or washroom exhaust. |
| | | Flat or sloped roof; models available for any roof application. |
| | | Injection molded urethane insulation; adhered between sleeves without air pockets. |
| | | Treated deck flange; can be PVC coated for proper adhesion of PVC membrane or bituminous painted for BUR or ModBit membrane. |
| | | Material options and thicknesses; available in .064” (1.6 mm) mill finish 1100-0T alloy aluminum or .032” (0.831 mm) 25 oz copper; 0.031" (0.79 mm) 22 ga. Type 304 stainless steel. |
| | | 20 year Warranty; guaranteed against leaks, condensation and defects in materials and/or manufacture when installed in accordance with Thaler “Installation Instructions”. |
| | | Virtually Maintenance-Free; slotted collar allows lint to vent directly to exterior for dryer echaust but should be checked and/or cleaned periodically if neccessary. Never needs caulking (any caulking at any time will invalidate 20 year warranty) |
| | | Written “Installation Instructions”; provided with every Thaler product. |
